Balsa model designed to be flown with twin.049 engines (not included) as a U-Control or build it for exhibit and show purposes. Nose gun turret/cowl for a B-24J model included. Rugged landing gear. Movable flying surfaces. Removable wing panels. Gu n turret and cockpit canopy. Full color decals for both a ''D'' and ''J'' model. Detailed tail group and tail turret. Waist gun, belly gun and boarding ladder. Detailed main gear and nose wheel. Detailed nose cowl/gun turret.
...more about the Guillows B-24D Liberator 48.5''
|
Authentic scale airplane. Designed to be built as a magnificent static desplay model, a flying rubber powered, gas free flight or a U-Control model!. Light plastic nose cowl and detailed parts. Plastic propeller and molded canopy. Razor sharp die-c ut balsa parts. Plastic wheels. Reinforced wire landing gear. Tissue covering. Clay is included for balancing the model. A generous amount of strip basla stock is provided. A complete set of decals. For Gas and U-Control
...more about the Guillows Focke-Wulf FW-190 25.75''
|
Balsa and Wire Construction Lightweight for Longer, Stable Flights Flies Indoors Or Outdoors. All Wood and Wire Needed to Build Kit. Plans and Instructions for electric or Rubberband flight. Rubber Bands. Wheels. Prop. Tissue paper for sheeting. Th is is a J-3 Kitten Ultralight 24'' Electric or Rubberband Airplane
...more about the Peck-Polymers J-3 Kitten Ultralight 24'' Laser Cut
|
Simple, built-up Balsa construction. Hand-selected balsa. 70 Laser-cut parts. FAI Tan II contest rubber. Vacuum molded parts. Color peel and stick decal set. Lightweight blue colored tissue. Clear canopy. 5'' plastic prop, rubber, decals, plans, in structions, colored tissue paper, cowling, canopy, thrust bearing, plastic wheels, all balsa to build the kit (over 70 parts). This is the F4U Corsair Rubber-Powered Free-Flight Airplane from Dumas. This is a walnut scale
...more about the Dumas Corsair 17.5''
|
''Stick and Tissue'' Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). Over 40 Lazer-Cut Parts and Hand Selected Balsa. Light-Weight Gray, Green and White Tissue Paper Covering. Co lor Peel-And-Stick Decal Set. Full Size Plan and Step-By-Step Instructions. Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. Vacuum-Formed Plastic Cowling, Exhuast and Canopy. F.A.I. Tan II Contest Rubber Bands. Un-Bent
...more about the Dumas P-51B Mustang 17.5''
|
Authentic scale airplane. Rubber powered (rubber band included). Light vacuum formed parts such as nose cowl, bubble canopy, and small external details. Genuine decal set. Scale plastic main wheels (where required). Plastic propeller. Plastic thrus t bearing. Wire propeller shaft. Covering tissue. Razor sharp die-cut balsa parts and generous quantity of strip stock. Accurate scale plan and illustrated step-by-step model building booklet. One Focke-Wulf FW-190 Airplane.
...more about the Guillows Focke-Wulf FW-190 16.5''
|
''Stick and Tissue'' Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). Over 60 Lazer-Cut Parts and Hand Selected Balsa. Light-Weight Red and White Tissue Paper Covering. Color Peel -And-Stick Decal Set. Full Size Plan and Step-By-Step Instructions. Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. Vacuum-Formed Cowling and Clear Plastic Windshield Sheet. F.A.I. Tan II Contest Rubber Bands. Un-Bent Landing
...more about the Dumas Piper Cub Coupe 17.5''
|
''Stick and Tissue'' Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). Over 50 Lazer-Cut Parts and Hand Selected Balsa. Light-Weight Red and White Tissue Paper Covering. Color Peel -And-Stick Decal Set. Full Size Plan and Step-By-Step Instructions. Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. Vacuum-Formed Clear Plastic Cowling and Windshield Sheet. F.A.I. Tan II Contest Rubber Bands. Un-Bent Landing
...more about the Dumas T-34 17.5''
|
''Stick and Tissue'' Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). Over 70 Lazer-Cut Parts and Hand Selected Balsa. Light-Weight Gray Tissue Paper Covering. Color Peel-And-Stic k Decal Set. Full Size Plan and Step-By-Step Instructions. Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. Vacuum-Formed Cowling and Bombs with Clear Plastic Canopy. F.A.I. Tan II Contest Rubber Bands. Un-Bent Landing Gear
...more about the Dumas F-4F Wildcat 17.5''
|
''Stick and Tissue'' Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). Over 90 Lazer-Cut Parts and Hand Selected Balsa. Light-Weight Yellow Tissue Paper Covering. Color Peel-And-St ick Decal Set. Full Size Plan and Step-By-Step Instructions. Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. Vacuum-Formed Cowling. F.A.I. Tan II Contest Rubber Bands. Un-Bent Landing Gear Wire and Pre-Hooked Propeller Shaft.
...more about the Dumas Tiger Moth 17.5''
|
''Stick and Tissue'' Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). Over 50 Lazer-Cut Parts and Hand Selected Balsa. Light-Weight Gray Tissue Paper Covering. Color Peel-And-Stic k Decal Set. Full Size Plan and Step-By-Step Instructions. Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. Vacuum-Formed Cowling. F.A.I. Tan II Contest Rubber Bands. Un-Bent Landing Gear Wire and Pre-Hooked Propeller Shaft.
...more about the Dumas Spirit of St. Louis 17.5''
|
Simple rubber band power, just wind propeller and hand launch into the wind. Hand selected laser cut balsa and vacuum molded plastic parts. Full size plans make building easy for beginning modelers. One Dumas Ford Tri-Motor Walnut Scale Rubber Powe red Airplane with 5'' (127mm) plastic propeller, peel and stick decal set, FAI Tan II contest rubber, lightweight colored tissue, plan sheet, 2 wheels, thrust bearing. This is the Dumas Ford Tri-Motor Walnut Scale Rubber Powered
...more about the Dumas Ford Tri-Motor Rubber Powered Kit 17.5''
|
Simple rubber band power, just wind propeller and hand launch into the wind. Hand selected laser cut balsa and vacuum molded plastic parts. Full size plans make building easy for beginning modelers. One Dumas Skymaster Walnut Scale Rubber Powered A irplane with 5'' (127mm) plastic propeller, peel and stick decal set, FAI Tan II contest rubber, lightweight colored tissue, plan sheet, 2 wheels, thrust bearing. This is the Dumas Skymaster Walnut Scale Rubber Powered Flying
...more about the Dumas Skymaster 17.5''
|
Simple rubber band power, just wind propeller and hand launch into the wind. Hand selected laser cut balsa and vacuum molded plastic parts. Full size plans make building easy for beginning modelers. One Dumas A6M3 Zero Walnut Scale Rubber Powered A irplane with 5'' (127mm) plastic propeller, peel and stick decal set, FAI Tan II contest rubber, lightweight colored tissue, plan sheet, 2 wheels, thrust bearing. This is the Dumas A6M3 Zero Walnut Scale Rubber Powered Flying
...more about the Dumas A6M3 Zero 17.5''
|
Simple, built-up Balsa construction. Hand-selected balsa. 110 Laser-cut parts. FAI Tan II contest rubber. Vacuum molded parts. Color peel and stick decal set. Lightweight red colored tissue. Clear windshield sheet. 5'' plastic prop, rubber, decals, plans, instructions, colored tissue paper, cowling, canopy, thrust bearing, plastic wheels, all balsa to build the kit (over 110 parts). This is the Staggerwing Biplane Rubber-Powered Free-Flight Airplane from Dumas. This is a
...more about the Dumas Staggerwing 17.5''
|
''Stick and Tissue'' Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). Over 70 Lazer-Cut Parts and Hand Selected Balsa. Light-Weight Yellow and Green Tissue Paper Covering. Color P eel-And-Stick Decal Set. Full Size Plan and Step-By-Step Instructions. Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. Vacuum-Formed Plastic Cowling and Engine Exhaust Sheet. Flat Plastic Window Sheet. F.A.I. Tan II Contest
...more about the Dumas Curtiss P-6E Hawk 17.5''
|
For beginners learning how to build & fly or the advanced modeler. ''Stick and Tissue'' construction (many small sticks glued together to form the airplane and then the frame is covered with tissue paper). Over 60 laser-cut parts and hand selec balsa. Lightweight white tissue paper covering. Color peel-and-stick decal set. Full size plan and step-by-step instructions. Plastic propeller, tailwheel and 2-two-piece wheels. Vacuum-formed plastic cowling, wheel pants and
...more about the Dumas Fokker E111 17.5''
|
For beginners learning how to build & fly or the advanced modeler. ''Stick and Tissue'' construction (many small sticks glued together to form the airplane and then the frame is covered with tissue paper). Over 100 laser-cut parts and hand sele balsa. Lightweight white tissue paper covering. Color peel-and-stick decal set. Full size plan and step-by-step instructions. Plastic propeller, tailwheel and 2-two-piece wheels. Vacuum-formed plastic cowling, wheel pants and
...more about the Dumas P-26 Peashooter 17.5''
|
For beginners learning how to build & fly or the advanced modeler. ''Stick and Tissue'' construction (many small sticks glued together to form the airplane and then the frame is covered with tissue paper). Over 60 laser-cut parts and hand selec balsa. Lightweight white tissue paper covering. Color peel-and-stick decal set. Full size plan and step-by-step instructions. Plastic propeller, tailwheel and 2-two-piece wheels. Vacuum-formed plastic cowling, wheel pants and
...more about the Dumas Fairchild PT-19 17.5''
|
|
|
|
Waco YMF-5 by Dumas
|
| $37.95 $27.49
(27% off) |
Product Number
dum227 |
Availability
In Stock |
|
|
|
|
''Stick and Tissue'' Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). Over 70 Lazer-Cut Parts and Hand Selected Balsa. Light-Weight Red & White Tissue Paper Covering. Color Pe nd-Stick Decal Set. Full Size Plan and Step-By-Step Instructions. Plastic Propeller and 2-Two-Piece Wheels. Clear Plastic Canopy & Vacuum-Formed Cockpit, Cowling & Wheel Pants. F.A.I. Tan II Contest Rubber Bands. Un-Bent Landing
...more about the Dumas Gee Bee Model E 30''
|
''Stick and Tissue'' Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). Over 75 Lazer-Cut Parts and Hand Selected Balsa. Light-Weight White Tissue Paper Covering. Color Peel-And-Sti ck Decal Set. Full Size Plan and Step-By-Step Instructions. Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. Vacuum-Formed Plastic Cowling, Wheel Pants and Clear Plastic Windshield Sheet. F.A.I. Tan II Contest Rubber Bands.
...more about the Dumas Mr Mulligan 30''
|
''Stick and Tissue'' Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). Over 80 Lazer-Cut Parts and Hand Selected Balsa. Light-Weight Yellow Tissue Paper Covering. Color Peel-And-St ick Decal Set. Full Size Plan and Step-By-Step Instructions. Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. Vacuum-Formed Cowling and Clear Plastic Windshield Sheet. F.A.I. Tan II Contest Rubber Bands. Un-Bent Landing Gear
...more about the Dumas DH C-2 Beaver
|
''Stick and Tissue'' Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). Over 90 Lazer-Cut Parts and Hand Selected Balsa. Light-Weight Gray Tissue Paper Covering. Color Peel-And-Stic k Decal Set. Full Size Plan and Step-By-Step Instructions. Plastic Propeller and 2-Two-Piece Wheels. Vacuum-Formed Clear Plastic Canopy, Cowling, Exhausts and Windows. F.A.I. Tan II Contest Rubber Bands. Un-Bent Landing Gear Wire
...more about the Dumas Fieseler 156 Stork
|
''Stick and Tissue'' Construction (Many Small Sticks Glued Together To Form The Airplane and Then The Frame Is Covered With Tissue Paper). Over 110 Lazer-Cut Parts and Hand Selected Balsa. Light-Weight Dark Blue Tissue Paper Covering. Color Peel-An d-Stick Decal Set. Full Size Plan and Step-By-Step Instructions. Plastic Propeller, Tailwheel and 2-Two-Piece Wheels. Vacuum-Formed Clear Plastic Canopy, Cowling and Exhausts. F.A.I. Tan II Contest Rubber Bands. Un-Bent Landing
...more about the Dumas F8F-2 Bearcat
|
Full Scale Plans. Step-by-Step Instructions. Laser Cut Parts. Peel and Stick Decals. Vacuum Formed Cowling. Plastic Propeller and Thrust Bearing. Plastic Parts and and Color Tissue Included. FAI Tan II Contest Rubber. V-Tail or Standard Tail Design . All wood to complete kit, Plastic Wheels, Propeller, Rubber Band, Cowl, Decals, White Tissue, Plans, Landing Gear Wire, and Instructions. This is a Rubber Powered Flying Scale Model of the Beechcraft Bonanza by Dumas
...more about the Dumas 0318 Bonanza Model 35
|
