Accurately reproduced exterior and cockpit. Photo etched stainless steel aileron & flap hinges. Photo etched brass bomb bay doors and engine ventilation grill. Meticulously detailed engine. Film printed control panel. Exquisitely detailed cockp Electronic equipment cabin. Optional torpedo, bombs or fuel tank can be installed within the bomb bay. Additional external stores for wing mounting. Realistic landing gear struts. Metal aileron and flap shafts. Wing-installed
...more about the Trumpeter 1/32 TBF-1C Avenger Aircraft
|
Top-quality, injection molded plastic parts with a high level of detail and accuracy Show off the intricately details with the clear pieces 4 rubber tires Photo etched pieces Superb cockpit detail including pilot's seat Authentic waterslide decals for 2 versions Illustrated assembly guide. One plastic model. This is the 1/32 Scale Messerschmitt Me 262 A-1a Clear Edition Plastic Model Kit from Trumpeter. Suitable for Ages 14 &
...more about the Trumpeter 1/32 Visible Messerschmitt Me262 A-la Fighter
|
Injection molded plastic parts accurately reproduce the exterior with scribed surface details. Build either a highly detailed General Electric F110 or a Pratt and Whitney F100 engine. Exquisitely reproduced cockpit! A boarding ladder, two pilot fig ures, and one ground crew figure. Optional crystal clear or smoky clear canopy parts that may be modeled in open or closed position. Choice of HUD units. 2 different styles of ''bird cutter'' 4-vaned IFF units. Optional long
...more about the Academy Plastics 1/32 F-16CG/CJ Block 40/50
|
Accurately reproduced static display model with scribed panel lines and rivet details. Various lights and lenses molded in clear styrene. 5 intricately detailed figures. Metal landing gear struts. Meticulously detailed main gear wells. Grooved rubb er tires. Accurately reproduced cockpit including NACES ejection seats, instrument panels, side consoles, stick, throttle & rudder pedals. Optional single-seat or 2-seat clear canopy. The radome can be posed open or closed. In
...more about the Academy Plastics 1/32 F/A-18D Hornet
|
Limited edition. High-quality plastic parts molded with realistically scribed panel lines and rivet details. Beautifully reproduced cockpit! The clear, split canopy can be posed either as opened or closed. 2 pilot and 2 ground crew figures molded w ith very realistic details! Die cast metal landing gear struts and solid synthetic, grooved rubber tires. Gear bays exquisitely detailed with all the plumbing! The radome can be posed open or closed. Highly detailed radar bay.
...more about the Academy Plastics 1/32 F/A 18C Hornet Chippy Ho
|
The UH-1C is the third generation of Bell's Iroquois series.The UH-1C ''Huey'' saw its combat tour through to the close of the Vietnam War, deadly to the enemy and essential to US forces in its capacity as a most formidable gunship. Highly detailed cockpit, engine and transmission Miniguns, M60s and rocket pods Pilots and two crewmen figures Cartograf nose art decals for four Vietnam gunships Limited Edition. One 1/35 UH-1C ''Huey'' Frog Helicopter Model Kit. This is a 1/35
...more about the Academy Plastics 1/35 UH-1C Huey Gunship Special Nose Art
|
The Camel was perhaps the best allied fighter of WW I. Its victory tally was 1,924 aircraft shot down in only sixteen months of fighting. The Camel was an Aces' mount which was extremely agile and had a fast rate of climb. In a controversial air ba ttle in 1918, the great Baron Von Richthofen fell to the guns of a 209 Squadron RAF Camel flown by Canadian Roy Brown. Medium grey plastic pieces molded to sprue trees. Single seat cockpit. Recessed panel lines give authentic
...more about the Academy Plastics 1/32 Sopwith Camel F.1
|
One of the most famous allied fighters of the First World War, fast, maneuverable Nieuport 17's were flown by some of France's most famous aces, including Georges Guynemer. This Nieuport 17 is a biplane. Machine gun mounted to the top of the upper wing. Single seat cockpit plane powered by one 2-blade propellor engine. Detailed cockpit interior and engine compartment. Detailed panel lines give an authentic appearance. Easy to follow pictorial assembly instructions.
...more about the Academy Plastics 1/32 Nieuport
|
Fully engraved panel lines and rivet details. Die cast metal landing gear struts. Accurately reproduced exterior and cockpit. Radome, airbrake, and open or closed canopy. Folding wings. Four detailed figures (2 pilots & 2 ground crew). Various ons; Sidewinders, Sparrows, 500lb bombs, FLIR, SLAM, Paveway II & III, JDAM, AMRAAM, Snakeyes, HARM, Mavericks, TINS. Solid synthetic rubber tires. Authentic markings including common data. Illustrated assembly guide. One Plastic
...more about the Academy Plastics 1/32 F/A-18C Hornet
|
A realistic depiction of a WWII Grasshopper Piper Cub. Highly detailed, injection molded Olive Drab plastic parts. Detailed cockpit with clear canopy. Detailed engine and landing gear. Authentic Cartograf waterslide decals. Illustrated assembly gui de. One Plastic Model. Assemble a US Piper Cub L-4 (O59) with this 1;35 Scale Plastic Model Kit from Bronco Models. Suitable for Ages 12 & Older. One Decal Sheet with Markings for 4 US Army Versions. 1) Piper Cub L-4A ''Operation
...more about the Bronco Models 1/35 WWII Piper Cub L4H Grasshopper Aircraft
|
Fine fabric surface texture Highly detailed engine and cockpit Two rear seat options Six strut-mounted bazooka rocket tubes Separately molded ailerons, rudder and starboard boarding door Canopy & wheel masks Photo-etched accessories Decals & ng guide. One Plastic Model. Assemble the Piper Cub L4H ''Rosie the Rocketer'' with this 1/35 scale Plastic Model Kit from Bronco Models. Suitable for Ages 12 &
...more about the Bronco Models 1/35 WWII Piper Cub L4H Rosie/Rocketeer Aircraft
|
|
Plastic pieces attached to sprues Detailed pictorial instructions guide you through assembly Limited Run Resin parts Detailed cockpit Photo-etched parts Detailed scale model for adult collectors. One plastic model kit. This is a 1/32 Scale Brewster F2A-3 Buffalo Model 339-23 US Navy & USMC Plastic Model Kit from Czech Model. For ages 14 to adult. Decal Options for 4 Versions. 1; BuNo 1553, VMF 221, Midway. 2; BuNo 1612, NAS Jacksonville. 3; A51-10/307, 25 Sqn. RAAF, Perth.
...more about the Czech Models 1/32 Brewester F2A-3 Model 339-23 Buffalo
|
Exquisitely reproduced model replica, engineered down to the smallest detail! Simulated laminar flow airfoil shape wings. Movable ailerons and rudder. Accuratley reproduced spent shell exit ports and camera port. Rotating propeller with movable bla des. Prototypically reproduced propeller blades. Beautifully detailed clear engine cowling can be assembled in the open or closed position. Outstanding engine detail including radiator with etched metal parts. Superb cockpit
...more about the DML 1/32 P-51D Mustang 1st 1/32
|
Delicate details produced by slide mold Fuselage camera ports w/ clear parts relistically portray F-6D Reconnaissance aircraft Rear air outlet can be positioned open or closed Camera hatch on the fuselage can be assembled open or closed Propeller b lades are moveable, rotate and accurately curved cross-section and true-to-scale thickness Transparent engine cowling comes w/ fine detail Engine cowing cover can be assembled open or closed Pilot's seat is upgraded w/
...more about the DML 1/32 F-6D Mustang
|
|
Highly detailed plastic pieces molden in gray and clear Contains photo-etched and metal parts Newly tooled and accuretely shaped fuselage specific to the P-51D Early Production Propeller blades w/accurately curved cross-section and true to scale th ickness are moveable and can rotate Engine cowling cover can be assembled open or closed Moveable ailerons and rudder Rear outlet can be positioned open or cloed Canopy can be positioned open or closed Two types of fuel tanks are
...more about the DML 1/32 P-51D Mustang Early Production
|
|
Detailed 1/48 scale model for static display. Parts molded in gray, plus clear pieces. Engraved panel lines on body. Plane may be built with wheels or floats for landing gear. Authentic cockpit area. Three-bladed propeller on the nose. Several wind ows on each side of plane. Waterslide decals. Pictorial instructions. One 1/48 DHC Otter Wheels/Floats Aircraft Kit. This is a Plastic 1/48 DHC Otter Wheels/Floats Aircraft from Hobby Craft. It's for experienced modelers ages 10
...more about the Hobby Craft Canada 1/48 DHC Otter w/Skis & Wheels
|
Medium grey plastic pieces molded to sprue trees. Clear pieces for canopy included. Dual seat cockpit. Recessed panel lines give authentic look. Detailed cockpit and landing gear. Realistic afterburner. Waterslide decals. Detailed pictorial instruc tions. One 1/48 Scale CF-105 ''Arrow'' Plastic Model Kit. This is a 1/48 Scale CF-105 ''Arrow'' Plastic Model Kit by Hobby Craft. For Experienced Modelers. One decal sheet with markings for five aircraft. Canadian RL201-RL205.
...more about the Hobby Craft Canada 1/48 Avro Arrow
|
Medium Grey plastic pieces molded to sprue trees. Detailed cockpit. Detailed landing gear. Engraved panel lines give authentic look. Authentic markings. Detailed pictorial instructions. One 1/32 Scale SPAD XIII ''Aces'' Plastic Model Kit. This is a 1/32 Scale SPAD XIII ''Aces'' Plastic Model Kit from Hobbycraft. One decal sheet with markings for two aircraft. 1; Capt. Eddie Rickenbacker, 95 Sqn., USA, 1918. 2; Lt. Charles Nungesser, SPA 65, France, 1918. Aircraft Colors.
...more about the Hobby Craft Canada 1/32 SPAD XIII Aces
|
Medium Grey plastic pieces molded to sprue trees. Detailed cockpit. Detailed landing gear. Engraved panel lines give authentic look. Authentic markings. Detailed pictorial instructions. One 1/32 Scale SPAD XIII ''International'' Plastic Model Kit. This is a 1/32 Scale SPAD XIII ''International'' Plastic Model Kit from Hobbycraft. One decal sheet with markings for two aircraft. 1; Capt. Georges Guynemer, SPA3, France, 1917. 2; Mag. Francesco Barraca, Italy, 1918. Aircraft
...more about the Hobby Craft Canada 1/32 SPAD XIII International
|
Precisely molded light gray plastic parts with raised and engraved panel line details. Detailed cockpit, landing gear and engine. Authentic waterslide decals. Illustrated assembly guide. One Plastic Model. Assemble the Royal Flying Corps Camel ''Le Rhone'' with this 1;32 Scale Plastic Model Kit from Hobby Craft. Modeling Designed for the Master Modeler. One Decal Sheet with Markings for 2 RFC Versions. - Sopwith Camels of WWI; serial No.D9443 serial No.F2137. Airframe and
...more about the Hobby Craft Canada 1/32 Sopwith Camel RFC Le Rhone
|
Precisely molded light gray plastic parts with raised and engraved panel line details. Detailed cockpit, landing gear and engine. Authentic waterslide decals. Illustrated assembly guide. One Plastic Model. Assemble the Camel ''Clerget'' Aces with t his 1;32 Scale Plastic Model Kit from Hobby Craft. Modeling Designed for the Master Modeler. One Decal Sheet with Markings for 3 Aircraft Versions. - Sopwith Camel Aces of WWI. Airframe and Detail Paint Colors; -Khaki, Light
...more about the Hobby Craft Canada 1/32 Sopwith Camel Aces
|
Precisely molded light gray plastic parts with raised panel line details. Parts provided to build either the Dr. 1 or F. 1 version. Well-appointed cockpit. Detailed landing gear and engine. Two types of propeller blades. Wing-mounted armament. Auth entic waterslide decals. Illustrated assembly guide. One Plastic Model. Assemble the Fokker Triplane with this 1;32 Plastic Model Kit from Hobby Craft Suitable for Ages 10 & Older. One Decal Sheet with Markings for 8 German
...more about the Hobby Craft Canada 1/32 DR1 Fokker Tri-Plane
|
Injection molded gray plastic with micro molded details. Exquisitely detailed engine. Complete cockpit detail including film for a life-like control panel. Canopy slides open and closed. Interior fuselage wall detail. Movable rudder. Photo-etched b rass parts. Install the dual nose mounted machine guns with or without hood. Highly detailed undercarriage and landing gear. Authentic waterslide decal markings. Illustrated assembly guide. (1) Plastic Model. Assemble an AVG P-40
...more about the Hobby Craft Canada 1/32 P40B/C AVG Tigers
|
Injection molded light gray plastic parts with raised details. Well-appointed cockpit. Detailed landing gear and engine. Two types of propeller blades. Authentic waterslide decals. Illustrated assembly guide. 1;32 Fokker Dr1 ''Late Aces'' Plastic M odel Kit. This is the Fokker Dr1 ''Late Aces'' 1;32 Plastic Model Kit from Hobby Craft Suitable for Ages 10 & Older. One Decal Sheet with Markings for 4 German Versions. 1; Dr1 425/17, M von Richthofen, JG 1, 1918. 2; Dr1
...more about the Hobby Craft Canada 1/32 Fokker DR1 Late Triplane 1
|
Precisely molded light gray plastic parts with raised and engraved panel line details. Stainless steel photo etched parts. Working tail gear. Optional folding wings or fixed wings. Rotating propeller. Meticulous cockpit detail including film insert for an extremely realistic control panel. Clear canopy parts with complete rivet detail. Fuselage interior detail. Metal hinges for stabilizers, wing ailerons and flaps. Exquisitely detailed engine. Well-appointed landing gear
...more about the Hobby Craft Canada 1/32 F4U-1D Corsair
|
Precisely molded light gray plastic parts with raised and engraved panel line details. Stainless steel and brass photo etched parts. Meticulous cockpit detail including metal control levers, safety harness with metal buckels, and film insert for an extremely realistic control panel. Clear canopy parts with complete rivet detail. Opening canopy. Metal hinges for wing flaps and ailerons. Exquisitely detailed engines including flexible vinyl parts. Well-appointed landing gear
...more about the Hobby Craft Canada 1/32 P-38J/L Lightning
|
The Lockheed (formerly General Dynamics) F-16 Falcon first flew in 1974 and won the US Air Force Lightweight Fighter Program fly-off to find a low cost alternative to the F-15 Eagle. The Falcon was the first US military aircraft to feature fly-by-w ire control which contributes to it's outstanding maneuverability. The F-16A Plus and F-16C are upgraded with more advanced avionics and targeting equipment and the C-model can also carry the AIM-120 Advanced Medium Range
...more about the Hasagawa 1/32 F-16A Falcon Plus/C
|
