|
|
The B-17F was developed from the B-17E, which was found to have insufficient defensive armament for daylight raids on occupied Europe. Changes included a ball turret in the belly, and a frameless nose canopy. Detailed 1/72nd scale for static displa y only. Markings included for one aircraft with unstaggered waist gun positions. Appx. 140 parts in light grey and clear with delicate recessed panel lines - not including all the unneeded extra parts from the early. B-17 kits.
...more about the Academy Plastics 1/72 B-17F Flying Fortress
|
The F-22 Raptor is an air dominance fighter with much-improved capability over current United States Air Force aircraft and existing fighters of other countries. The Raptor provides a first-look, first-shot, first-kill capability that will give Ame rican fighter pilots the edge to win any future conflict. The fighter also has an inherent precision ground attack capability. Threats that the F-15 will no longer be able to counter will be defeated by the lethal and survivable
...more about the Italeri 1/72 F-22 Raptor
|
The Swiss Rega mountain rescue service is the largest air rescue organization in Switzerland. By the end of 1995, they had fifteen Agusta A-109 K2 rescue helicopters. It is made to measure for the Rega, with a good height power factor and compact a mbulance equipment. Skill level 3 includes up to 100 white plastic pieces molded to sprue trees. -Clear pieces for the cockpit and door windows. Detailed cockpit and control panels. Detailed ambulance cabin with stretcher. Movable
...more about the Revell of Germany 1/72 Agusta A-109 K2
|
An accurate depiction of the X-15A-2 with external fuel tanks (1965); built with highly detailed polystyrene parts. Detailed cockpit with control panel and clear windscreen. Detailed nose and dolly wheel. Clear camera port insert. Supersonic combus tion ramjet. Realistically molded hydrogen dump and ammonia dump. Pilot figure with astronaught uniform detail. Display stand. Authentic waterslide decals. Illustrated assembly guide. (1) Plastic Model. Assemble the Experimental
...more about the Revell/Monogram 1/72 X-15 Experimental Aircraft
|
Injection molded parts embossed with realistic surface details Highly detailed cockpit Realistic landing gear Illustrated assembly guide Decal sheet with 4 different markings 1; US Marine Corps VMA-311 ''TOMCATS'' (160024/WL07) 2; VMA-214 ''BLACKSH EEP'' (158414/WE19) 3; VMA-214 ''BLACKSHEEP'' (160027/WE6) 4; VMA-311 ''TOMACATS'' (160028/WL10). 1/72 Scale A-4M Skyhawk Tomcat. This is a 1/72 scale A-4M Skyhawk Tomcat Plastic Model Kit by Fujimi. Suitable for Ages 10 &
...more about the Fujimi 1/72 A-4M Skyhawk Tomcats
|
New tooling!. Exquisitely reproduced ''Allison Engine'' version with a high level of detail and scale accuracy. Equipped with a ''Hispano Suiza'' 20mm cannon & reconnaissance camera. Micro-molded panel lines and rivet details. Detailed cockpit rior with clear canopy. Detailed landing gear and bays. A separate U.S. light utility vehicle (Jeep) and trailer. Authentic waterslide decal markings. Aircraft display stand. Illustrated assembly guide. (1) Plastic Model. Assemble
...more about the Academy Plastics 1/72 P-51 Mustang North Africa
|
Accurately reproduced static display model with fully engraved panel lines and rivet details. Detailed cockpit interior and clear canopy. Detailed landing gear. Realistically molded external loads. Waterslide decals. Illustrated assembly guide. (1) Plastic Model. Assemble an A-10A ''Operation Iraqi Freedom'' with this 1;72 Scale Plastic Model Kit from Academy. Suitable for Ages 10 & Older. One Waterslide Decal Sheet with Markings for 2 Aircraft Versions. 1; Capt. Kim
...more about the Academy Plastics 1/72 A-10A Plane Iraq
|
Accurately reproduced static display model with fully engraved panel lines and rivet details. Detailed cockpit interior with clear canopy. Detailed landing gear and bays. Authentic waterslide decal markings. Illustrated assembly guide. (1) Plastic Model. Assemble a F-89D Scorpion with this 1;72 Scale Plastic Model Kit from Academy. Suitable for Ages 10 & Older. One Waterslide Decal Sheet with Markings for 2 USAF Versions. 1; 61st FIS, Ernest Harmon, AFB, Newfoundland, 1995.
...more about the Academy Plastics 1/72 F-89D Scorpion
|
A re-released kit with retooled wings to reflect the extended wingtips on some of the tank-plinking Stukas. Injection molded plastic parts with scribed panel lines and rivet details. Nicely detailed 37mm Flak gunpods mounted just outboard of the ma in gear. Meticulous attention paid to the interior walls. Choice of open or closed canopy. Detailed cockpit and landing gear. Waterslide decals. Illustrated assembly guide. (1) Plastic Model. Assemble the Junkers Ju 87G-2 Stuka
...more about the Academy Plastics 1/72 JU87G-2 Stuka Kanonen Vogel
|
This static display model of ''The Fork-Tailed Devil'' is realistically reproduced with highly detailed, injection molded plastic parts including scribed surface details. Highly detailed cockpit with intricately detailed side walls and control pane l. Multiple clear canopy parts give you the option of displaying it in open or closed position. The main wheel wells are complete with the plumbing and duct details. Detailed landing gear struts. Optional bazooka rocket launchers,
...more about the Academy Plastics 1/72 P-38J Lightning
|
A highly detailed static display model, realistically depicting the two-seat scout and dive bomber for the US Navy. Rotating 4-blade propeller. Detailed weapons bay interior loaded with two bombs. The zero length rocket launcher stubs are molded di rectly to the underside of the wings. _ The rear gunner cockpit is armed with twin machine guns and armor plating. Nicely detailed landing gear struts and bay interiors. Engine details. Highly detailed pilot cockpit. Authentic
...more about the Academy Plastics 1/72 SB2-C Helldiver
|
Limited Edition. An accurate depiction of the last of the French Navy fighters to be designed with guns as its primary air-to-air weapons. Exquisitely detailed cockpit including ejection seat. Nicely detailed landing gear struts. Wheel bays with me ticulous detail. Engine duct top under the main wing. Positionable horizontal stabilizers. Airbrake may be fixed in the open or closed position. Optional external stores. Cartograf premium quality, waterslide decals. Illustrated
...more about the Academy Plastics 1/72 F-8P Crusader ''FN Special''
|
Finely engraved panel lines & rivet details Highly detailed cockpit & landing gear bay Authentic markings included Nicely detailed landing gear struts and bay interiors Detailed pilot cockpit Waterslide decals Illustrated assembly guide. (1 c Model. Plastic Model Kit from Academy. Suitable for Ages 14 & Older. One Decal Sheets with Markings for 12 Versions. 1; Me262A-1a, W.Nr.111918, III./JG7. 2; Me262C-1a (V186), W.Nr.130186, Obstit, Heinz Bar, III./EJG2, March
...more about the Academy Plastics 1/72 Messerschmitt Me262A-1a
|
Medium grey plastic pieces molded to sprue trees Clear pieces for canopy included Single seat cockpit includes seat, control stick & instrument panel Fully engraved panel lines and rivet details Detailed cockpit and landing gear Detailed pictor instructions. One plastic model. This is a 1/72 Scale F/A-18C Hornet Plastic Model Kit from Academy. Suitable for Ages 10 & Older. One decal sheet with markings for 3 different aircraft. 1; VMFA-212 ''Lancers'', MCAS Iwakuni,
...more about the Academy Plastics 1/72 F/A-18C Hornet
|
Limited Edition Reproduced with main fighter of US Navy actively engaged in the 60's and 70's Finely engraved panel lines and rivet details Nicely detailed cockpit and landing gear Various weapons included Cartograf premium quality, waterslide deca ls Illustrated assembly guide. One Plastic Model. This is the 1/72 F-8J Crusader ''US Navy'' Plastic Model Kit from Academy. Suitable for Ages 10 & Older. One Waterslide Decal Sheet with Markings for 4 Versions. 1; F-8J , Bu
...more about the Academy Plastics 1/72 F-8J Crusader
|
Detailed 1/72nd scale for static display only. Markings included for one aircraft; ''Big Time Operator''. Appx. 170 parts in light green and clear with delicate recessed panel lines. Correct uncuffed propellers with detailed engines and cowlings. C ockpit detail; floor, instrument panels, pilots seats and controls, full rear cockpit with navigator and radio operators positions. Detailed bomb bay w/ bomb racks, positionable bomb doors, & crew access tube. Detailed rear
...more about the Academy Plastics 1/72 B-29A Super Fortress
|
From 1935 until production ceased in April 1945, a total of 12,726 B-17 Flying Fortresses were produced. The last and most numerous was the B-17G, which had the greatest bomb load and range of any version. Highly detailed, injection-molded plastic parts Limited edition Cartograf Premium Quality waterslide decals Fully engraved panel lines Highly detailed cockpit and bomb bay Bomb bay doors can be positioned open or closed Illustrated assembly guide. (1) Plastic Model. This
...more about the Academy Plastics 1/72 B-17G Nose Art
|
Highly detailed plastic pieces molded in gray and a smoky clear Fully engraved panel lines and rivet detailes Highly detailed cockpit and landing gear ''Cartograf'' premium quality decals included Includes markings for the following; F-16CJ, 5th AF , Misawa AB F-16CG, 8th FW, Kunsan AB F-16CJ, 79th FS, Shaw AB F-16CG, 51st FW, Osan AB F-16CJ, 52nd FW, Spangdalem AB Comes with various weapons, including AIM-9L/M Sidewinder, AIM-9X Super Sidewinder, AIM-120B AMRAM, AGM-88 HARM
...more about the Academy Plastics 1/72 F-16 CG/CJ Fighting Falcon
|
Medium grey plastic pieces molded to sprue trees Fully engraved panel lines & rivet details Highly detailed cockpit and landing gear Various weapons included ''Cartograf'' premium quality decals Detailed pictorial instructions. One plastic mode his is a 1/72 Scale KG-16C Fighting Falcon ''R.O.K. Air Force'' Plastic Model Kit from Academy. Suitable for Ages 10 &
...more about the Academy Plastics 1/72 KG-16C Fighting Falcon ROK Air Force
|
The KC-97G was a true tanker/transport that didn't need any equipment changes when it was used as a full transport. Four 700-gallon additional fuel tanks gave the KC-97G its distinguishing features. However, its ability to transport both passengers and freight along with the refueling capabilities is what put this aircraft in great demand. Plastic pieces are molded in gray and attached to sprue trees. Clear pieces for canopy included. Detailed cockpit. Recessed panel lines
...more about the Academy Plastics 1/72 KC-97G Flying Tanker
|
The KC-97G, because of its large airframe, made an excellent in-flight tanker. However, as a new series of jet fighters began emerging into service with much faster speeds, the KC-97G was no longer able to perform refueling procedures. Some mainten ance officers at the 126th air refueling squadron proposed to fit the KC-97G with GE J-47 jet engines to add to their propulsion power, which proved to be an excellent recommendation. The U.S. Air Force decided to refit all KC-97G
...more about the Academy Plastics 1/72 KC-97L Jet Tanker
|
The Focke-Wulf Fw190D Dora was the improved version of the Fw190A/F series. The Fw190D went into production in autumn of 1944, after much develop- ment, as the Fw190D-9. By this time the Fw190 was the most important Luftwaffe multi-role tactical ai rcraft on all fronts. Medium grey plastic pieces molded to sprue trees. Clear pieces for early normal canopy and later ''Galland Haube'' canopy are included. Single seat cockpit. Recessed panel lines give authentic look. Detailed
...more about the Academy Plastics 1/72 Focke-Wulf FW190D-9
|
Accurately reproduced static display model with fully engraved panel lines and rivet details. Highly detailed cockpit interior including ejector seat and control panel. Clear cockpit canopy. Model with airbrake in open or closed position. Detailed landing gear. Realistically molded external loads. Waterslide decals. Illustrated assembly guide. (1) Plastic Model. Assemble the F-8E Crusader ''U.S. Marines'' with this 1;72 Scale Plastic Model Kit from Academy. Suitable for
...more about the Academy Plastics 1/72 F-8E Crusader U.S. Marines
|
The F-84E was the first jet powered craft made by the republic. The ''E'' version added twelve inches to the fuselage and the cockpit area for the comfort of pilots. Internal fuel capacity was increased and the underwing bomb pylons were modified t o handle an additional pair of 230 gallon drop tanks in place of bombs. The ''G'' version was the last straight-wing variant and the first fighter designed to carry and deliver nuclear weapons. Plastic pieces attached to sprues
...more about the Academy Plastics 1/72 Republic F-84 E/G Jet
|
Realistically engraved/raised panel lines and other body characteristics Detailed cockpit and landing gear Seated pilot figure Clear cockpit canopy Auxilary fuel tank and missiles Authentic markings Illustrated assembly guide. One Plastic Model. As semble the USAF F-16A Fighting Falcon Jet Fighter with this 1;72 Scale Plastic Model Kit from Academy Skill Level; Experienced. One Waterslide Decal Sheet for 1 Aircraft Version. -United States YF-16A Falcon (No.AF 01 568).
...more about the Academy Plastics 1/72 Gd YF-16A Falcon USAF
|
The French built SPAD XIII was one of the most famous fighters of World War I. The SPAD used a liquid-cooled inline engine when most aircraft were equipped with rotary engines. A powerful and efficient craft, the SPAD was used for many years. Armed with one or two Vickers 7.65 mm machine guns firing through the propeller arc or a deadly 37mm Hotchkiss cannon, the SPAD was widely feared. Plastic pieces attached to sprues and molded in grey. The exterior surface of the plane
...more about the Academy Plastics 1/72 SPAD XIII WWI RAF
|
The Sopwith Camel is considered by many to be the best British fighter used in WWI. The Camel was fast and extremely nimble. Armed with two Vickers 7.7mm machine guns it made a formidable opponent. The name ''Camel'' came from the hump in the fusel age which covered the two machine guns. As successful as the Camel was, it was difficult to fly. Perhaps that is the secret of the Camel, it was so effective because only the best pilots could fly it. Plastic pieces attached to
...more about the Academy Plastics 1/72 Sopwith Camel WWI RAF
|
The F2H Banshee was developed from the FH-1 Phantom, the Navy's first fighter aircraft. The Banshee was used as a fighter-bomber and reconnaissance aircraft in Korea, and became the Navy's standard carrier-based all-weather fighter for much of the 1950's. The F2H-3 and F2H-4 were among the first Navy aircraft to be launched from the USS Hancock during initial tests of the new steam catapult. Medium grey plastic pieces molded to sprue trees. Clear pieces for canopy included.
...more about the Academy Plastics 1/72 F2H Banshee Jet Fighter
|
Aerial reconnaissance has become one of the most important sources of strategic information for military planners. Where orbiting satellites are suitable for acquiring certain information, a piloted aircraft is much more versatile as a data gathere r. Early in the development of this mammoth spy platform, clandestine flights over various communist countries were executed. With its advanced surveillance gear, the SR-71 can scan thousands of miles of the Earth's surface every
...more about the Academy Plastics 1/72 SR71-A Blackbird USAF
|
