Science

Fully assembled and controlled by 20 small servos, RPU-11 Processing Unit and RRC-T11 controller RPU-11 Processing Unit with rotary switch to change modes such as Edit Mode (to make and edit motions with ME) Automatic Mode (to play motion inputted automatically) Operating Mode (to control robot with wireless controller) and much more Tri-Axial Acceleration Sensor allows robot to distinguish posture to ground in order to get up from falls and more 3D CG Motion Editor
...more about the Futaba RBT-1 Futaba Robot RTW

Great Gift Idea
Pre-assembled humanoid robot can walk, run, do flips, cartwheels and dance moves and when programmed can compete in any Robo One Class ''J'' competition Robo Basic and Robo Script software offer easy programming Controlled with the IR Remocon devic e and 16 powerful HSR-8498HB digital servos (HRCX1050) built specifically for the ROBONOVA-I by Hitec, servos feature set pin locking of the servo arms for easy assembly, over-voltage current protection, super strong Karbonite
...more about the Hitec Rcd RoboNova-1 RTW w/Romocon IR Set

Humanoid robot can walk, run, do flips, cartwheels and dance moves and when programmed can compete in any Robo One Class ''J'' competition Assembles in 6-8 hours using only a screwdriver Robo Basic and Robo Script software offer easy programming Co ntrolled with the IR Remocon device and 16 powerful HSR-8498HB digital servos (HRCX1050) built specifically for the ROBONOVA-I by Hitec, servos feature set pin locking of the servo arms for easy assembly, over-voltage current
...more about the Hitec Rcd RoboNova-1 Kit w/Romocon IR Set

Everything needed for a complete radio control robotic experience Assembles in under an hour with pre-assembled modules 2. 4GHz receiver module and color video camera with sound allows operator to send live images and sound to their TV and record t hem to a DVD recorder, 150ft (46m) range (TV & DVD recorder not included) 6-channel transmitter with forward and reverse, left and right, arm raising and lowering and claw grasping operation, 150ft (46m) range Arm can be assembled
...more about the Revell/Monogram VEXplorer Robotic System

Controller is designed to turn off automatically if the controller is not in use for more than five minutes Vibration switch is located on the back of the transmitter One year limited warranty. Futaba RRCT-11 transmitter. This is the Futaba RRCT-11 2.4GHz Transmitter for the Futaba RBT-1
...more about the Futaba RRCT-11 Transmitter 2.4G RBT-1

Rotary switch to change modes such as Edit Mode (to make and edit motions with ME) Automatic Mode (to play motion inputted automatically) Operating Mode (to control robot with wireless controller) and other functions. RPU-11 Processing Unit with ca ble, small screwdriver and wiring harness. This is the RPU-11 Processing Unit for the Futaba Humanoid Robot,
...more about the Futaba RPU-11 Processing Unit RBT-1

Two LED lights on the receiver. One indicates the status of communication and the other on is red when there is power to the receiver. One year limited warranty. One Futaba RRCR-11 receiver for the robot. This is the Futaba RRCR-11 Receiver 2.4G fo r the RBT-1 Robot,
...more about the Futaba RRCR-11 Receiver 2.4G RBT-1

Karbonite construction. Karbonite gears are four times stronger than conventional white resin gears making them less likely to strip under the loads that would usually break standard gears. Replacement ball bearings included. Karbonite 1st, 2nd, 3r d and final gears, two steel pins, white spacer. This is the Karbonite Gear Set for the Hitec HSR-8498HB Robot Servo
...more about the Hitec Rcd HSR-8498HB Karbonite Gear Set

Direct replacement items Nylon construction Steel horn screws. One 8498 HA-1 horn. One 8498 HA-2 horn. One 8498 HB-1 horn. One 8498 HB-2 horn. Eight 2x5mm screws. Two 2.6x7.5mm screws. This is a replacement Servo Horn and Horn Screw Set from HiTec for use with with the HSR-8498HB robot servo found specifically on the
...more about the Hitec Rcd HSR-8498HB Servo Horn/Horn Screw Set

Direct replacement cable 3-wire with J type connector with polarity tab Black in color. One HSR-8948HB servo connector and cable. This is a Servo Connector with Cable from HiTec for use with the HSR-8948HB
...more about the Hitec Rcd HSR-8498HB Connector Cable 420mm

Gold color metal construction For Hitec robot servos. One Tapped U Type Universal Bracket. This is the Hitec Tapped U Type Universal
...more about the Hitec Rcd HR1B-0001 Universal Bracket Tapped U Type

Gold color metal construction. One Non-Tapped U Type Universal Bracket. This is the Hitec Non-tapped U Type Universal
...more about the Hitec Rcd HR1B-0002 Universal Bracket Non-Tapped U Type

Gold color metal construction. One set (2 pcs) Universal Bracket I Type. This is the Hitec Univeral Bracket I
...more about the Hitec Rcd HR1B-0003 Universal Bracket I Type (2)

Designed to be used only with lithium ion polymer battery (FUTX1115) One year limited warranty. One Futaba LBC-3E5 battery charger for the robot. This is the LBC-3E5 Charger for the Futaba Robot
...more about the Futaba LBC-3E5 Charger RBT-1

One black interface cable Connects the robot's processing unit to the PC. One FPC-11 interface cable for RBT-1 Robot. This is the Interface Cable for the Futaba Robot
...more about the Futaba FPC-11 Interface Cable RBT-1

NiMH Chemistry 5-cell standard hump battery Green Shrinkwrap White Connector. (1) 6 volt battery. This is the Hitec 6 volt 1000mAh 2/3AA NiMH Hump
...more about the Hitec Rcd 5C 6V 1000mAh NiMH 2/3A Bttry RoboNova-1

Specifically designed to allow Robonova programming from a PC. Serial Interface Cable with serial plug and straight jack. This is the Serial Interface Cable for the Hitec Robonova-1 Robot HRCX1002,
...more about the Hitec Rcd Serial Interface Cable RoboNova-1

Specifically designed to charge the 5-cell NiMH battery used in the Robonova. Quick Charger for the Hitec Robonova-1 with wire lead and connector. This is the Quick Charger for the Hitec Robonova-1 Robot HRCX1002,
...more about the Hitec Rcd Quick Charger 110V RoboNova-1